|
How much
area are you looking to light?
Use the chart
below to:
Watts:
AREA W/SUNLIGHT
150W
2’x2’ N/A
250W
3’x3’ N/A
400W
4’x 4’ 6’x6’
600W
5’x5’ 7’x7’
1000W 7’x7’ 11’x11’
(Top)
Should I
Purchase a High Pressure Sodium (HPS) or Metal Halide (MH) Grow
Light?
High Pressure
Sodium discharges the red/yellow light spectrum and facilitates
flowering and fruiting. This lamp may cause plants to have a stringy
structure accompanied by a high produce yield.
Metal Halide
discharges the blue/green light spectrum and intensifies the
vegetation growth. These lamps will cause plants to produce full
vegetation.
For optimum
lighting situations both metal halide and high pressure sodium bulbs
are used during the appropriate plant stage. First begin with the
MH for vegetative growth and then switch and/or add the HPS for
flowering and fruitation.
(Top)
What type
of soil less media should I be using?
Hydroton is an
ideal substrate for hydro gardening. The clay Hydroton is not only
applicable in the hydro culture, but also in the hydroponics system,
plantings, and potted plants as filter, as decoration layer and for
soil improvement.
CoCo TeK is a
soil less media that is composted of the coconut husk material and
other natural materials. It expands 5 times the condensed brick
size. It increases nutrient retention and has a high water holding
capacity. Its pH is balanced and has low sodium content for coir
fiber. The CoCo Tek is a good alternative when the plants roots are
fragile and or small by nature.
Plant Ready Gro a soil less
hydro organics grow media. It looks and feels like soil however it
is an all natural soil less composite. Plant ready Gro is
manufactured by Botanicare. It is a specialized blend of perlite,
coir fiber, Pure Blend, compost accelerator earth-worm castings,
agrimineral 72 silica clay, polymer hydro crystal and Rootsheild
Bio-fungicide.
(Top)
What is
conductivity?
It measures
the ability of a liquid media to conduct electricity. Dissolved
ionic salts, the main constituent of hydroponic solutions, create an
electrical current in solution while, pure water does not conduct
electricity. Electrical conductivity is measured in EC factors
ranging from 0 - 100 EC units. Increasing number of EC consists of
increasing concentration of nutrients in the media. The type of
plant will govern the electrical conductivity (EC) required for the
nutrient media. Tomatoes and green peppers will require a higher
EC (approximately 35 EC units) than does lettuce or basil (which
requires approximately 3-4 EC units). There are various reference
materials, books and websites that would provide EC ranges for
various plants.
(Top)
What is pH?
pH measures the acidity or alkalinity
of the water. Distilled water has a pH of 7. The pH scale
ranges from 2 (acidic) to 14 (basic) with 7 being neutral.
Plant requirements determine the pH. Tomatoes are accustomed
to acidic pH conditions of about 5.0 – 6.5 pH.
(Top)
Will a
fluorescent grow bulb from Wal-Mart give the same result?
Fluorescent
grow bulbs are great supplemental lighting for your ordinary house
plants and can be used to grow herbs such as basil, parsley and
dill. However, if you are interested in vegetables such as
tomatoes, peppers, cucumbers and fruit like strawberries,
blueberries, and cantaloupe year round only the MH and HPS would do
the job.
(Top)
Why can't I
just use any type of light bulb?
Plants need a certain spectrum
of light to enable it to grow. If you take a prism and hold it
up to the sun, you will get the complete color spectrum. If
you take the same prism and hold it up to an ordinary light bulb you
will only see a few spectrums.
(Top)
Based on Roanoke Virginia
KWH of 0.014200:
|
|
1000 watt Sodium |
600 watt Sodium |
430 watt Sodium |
400 watt Sodium |
250 watt Sodium |
150 watt Sodium |
1000 watt Halide |
400 watt Halide |
250 watt Halide |
175 watt Halide |
|
Ballast Wattage |
1100 |
665 |
490 |
464 |
295 |
170 |
1080 |
458 |
295 |
210 |
|
Cost per Month |
$7.50 |
$4.53 |
$3.34 |
$3.16 |
$2.01 |
$1.16 |
$7.36 |
$3.12 |
$2.01 |
$1.43 |
|
Initial Lumens |
140000 |
90000 |
53000 |
50000 |
28500 |
16000 |
110000 |
36000 |
20500 |
13000 |
|
Mean Lumens |
126000 |
81000 |
47700 |
45000 |
25600 |
14400 |
88000 |
28800 |
17000 |
10350 |
|
Mean Lumens per Watt |
114 |
121 |
97 |
96 |
86 |
84 |
81 |
62 |
57 |
49 |
|
Average Life Hours |
24000 |
18000 |
16000 |
24000 |
24000 |
24000 |
10000 |
20000 |
10000 |
10000 |
|
Replacement Bulb Cost |
$59.95 |
$64.95 |
$34.95 |
$19.95 |
$19.95 |
$19.95 |
$49.95 |
$24.95 |
$24.95 |
$24.95 |
|
5 year bulb replacement
cost |
$145.88 |
$210.73 |
$127.57 |
$48.55 |
$48.55 |
$48.55 |
$291.71 |
$72.85 |
$145.71 |
$145.71 |
|
Light Coverage at 2500
Lumens per sq. ft. |
7.1 x 7.1
Feet |
5.7 x 5.7
Feet |
4.4 x 4.4
Feet |
4.2 x 4.2
Feet |
3.2 x 3.2
Feet |
2.4 x 2.4
Feet |
5.9 x 5.9
Feet |
3.4 x 3.4
Feet |
2.6 x 2.6
Feet |
2 x 2
Feet |
(Top)
|